RC helicopter blade balance

RC helicopter blade balance is believed by some to be art all by itself and some people never really master it. Yes, there are RC helicopters that balance the balance you buy, but why spend those money if you do not have to? Or what if you need to balance your balloons and not have that tool nearby? Is it possible to balance your spinning pages without a balancing tool?

Yes, it is!

This article will create a free and very effective way for you to balance and balance the balance of your spreadsheets. All you have to do is spend some time and energy to do it right.

Some wonder why they balance the balance of the blades to begin with and the answer is very simple: to get rid of unwanted vibration in the RC helicopter. It's like driving a single-wheeled car – it just throws everything into the corridor. With RC helicopters, instead of throwing the flight, it can have a serious impact on the flight, and the vibrations included can even tear your RC helicopter apart!

The core idea of ​​torque is to get rid of as much unwanted vibration as possible. You must not be able to get rid of all of them, so do not be upset if there is little vibration.

The method we will use is effective and does not take long, but it is important that you do it with caution and accuracy. After all, you have blades that are static and balance balanced.

This is what you need – your main pages, circular shirt (market, main shirt, etc.). Somehow, crisp pencil, electric or balance tape, some thread and nut and ball.

How to balance your pages on dynamic

1. First, we want to determine that the center of gravity is the same for each sheet. Here's how we do it:

2. Place the circular body on a smooth surface.

3. Place one spinning blade in the top edge of the circular ball, balance with your fingers. Slide the sheet forward until you find the equilibrium point (also known as the center of gravity).

4. Then mark the pencil with a pencil and do not move the sheet as you mean it.

5. Do this with another sheet too.

6. Now look up the sheets by placing them on top of each other.

7. Move the top sheet enough to see where the balance is for it and compare two points.

8. If they are more than 1 mm apart, you need to change the equilibrium point of the blade, which has the center of gravity near the center of gravity, by moving the equilibrium point closer to the ball hole. You can do this by adding a small strip of tape near the ball hole until the center of gravity matches both sheets

9. Repeat this until you have applied enough coil to make the necessary adjustments to fit the center of gravity (equilibrium) of both papers and you are ready!

How to Balance Your Static Static

This type of balance fits the weight of each sheet to another and here's how we do it:

1. Take the nuts and bolts and attach the blades and put them together symmetrically as if they were in flight.

2. Keep the blades from your thread. You can do this with a wingsuit or simply put the thread between the top sheet and the nut before attaching them. Make sure the thread is lined up with the center of the pages or you have just wasted your time. You can also send the end of the bold between two parts of equal height (like 2 to 4) to level them.

3. Lift the blade with the thread and allow it to hang naturally. Look at the eye level to see if they are level or if one spin is lower than the other. If they are in the field, then it's good! If they are not level, we need to fix it by adding small tables to the table that's higher (meaning it's lighter).

The key is to add the strips near the center of gravity or center of gravity so that you can not undo all the work you have already done. Just add the table until they are both level and when they are equal, you testify that they are balanced! You are now a public RC helicopter blade balance expert! Well done!

Source by Justin R. Smith

Leave a Reply

Your email address will not be published. Required fields are marked *