Is there a way to clean the old prescription glasses with the yellow nose insert?

Your prescription goggles may look as beautiful as the day you received them, but if your nose pads start to turn yellow, or better to build a green gunk, they will be ugly if they get closer to you. What can you do with this problem? Is there anything you can do to clean the yellowed nose pads on your glasses?

Why turn yellow nose pads

Nose inserts are made of pure plastic. They are constantly in contact with their skin and the skin is often sweaty under the plastic. Sweat swings over the nose pads over time. On average, it takes about a year for the nose pads on your glasses to turn yellow and probably want your glasses to last longer than a year, especially if you pay a lot for designer glasses.

In addition, the reaction between the acidity of the sweat and the metal of the frames can result in a green recovery on the nose cushions. This buildup also contains dirt and dirt from the skin. It's ugly, and it isn't quite intentional to stop thinking.

Can it be cleaned?

The answer is whether the nose pads can be cleaned or not. You can't do much for yellowed nose cushions. Unfortunately, if the nose insert turns yellow, it remains constant. However, the green gunk and dirt under the nose insert can be cleaned.

One way to do this is to use a pre-moistened alcohol pad. Place the alcohol holder between the nose and the frame and allow some parts of the alcohol to leak onto your nose. Then rinse with water.

If this does not work, use a soft bristle toothbrush, preferably a child size, and rub the nose pads. You can remove them even if they are really clean, but make sure you keep cautious ears on the screws, if yes, because they are small.

Some people wearing glasses claim to soak for one hour in soapy water, then rinse them, and remove the gunk under the nose pads. Again, this does not help in the yellowed plastic, but if you recover it is worth trying.

Consider the Alternative

If you have a yellowish nose insert, there is another alternative. Replacing nose pads is really affordable. Pick up a repair kit for your nose at a drugstore or local optometrist, but make sure your glasses are with you because they are different and will need the right one.

To make the replacement, start with a light towel. This keeps the little pieces out of the table. Then use a jeweler's screwdriver to remove the old pillows. When turned off, use alcohol-soaked pillows to clean the frames where they are close to the nose pads. He wants all the remnants to be removed before the new pillows are inserted.

After the glasses are clean, install the new cushions with the jeweler's screwdriver. Do it so tenderly, because it is very easy to damage these tracks. If you feel resistance when you try to screw the new screw, remove it and restart it.

When done, put some clean nail polish or white glue on the screw heads. In this way, they will not slip, but with a screwdriver you can remove them if needed later. Do not use strong adhesives, as this will make it difficult to remove the nose inserts when they become yellow. When you're done, you'll have glasses that look as good as they did on the day of purchase, and you'll pay very little for a new look.

Source by Amy Nutt

Leave a Reply

Your email address will not be published. Required fields are marked *