How to reset the filter light on your American Style Side-by-Side refrigerator

One of the most important things when it comes to american style side closets is to change water filter equipment regularly. After changing the coolant container, restart the filter indicator on the refrigerator screen to check when it is time to change your refrigerator again.

Unfortunately, you probably lost your manual now. Do not worry, keep reading.

Each output sidebar gives its own instructions for resetting the indicator light. So here's a list of more than 30 coolers about how to reset the light after switching coolant filters:

Amana: press and hold the Lock and Auto (or Water) buttons on the dose pad (At the same time) for 4 seconds until the display light starts blinking, then release the keys.

LG / Atag / Fagor / Liebherr: Bauknecht: Press and hold the Reset button for 3 seconds until the light turns green.

Baumatic: press the Ice Maker Lock button for 3 seconds or more.

Beko / Teka: Press and hold the button for 5 seconds.

Bosch / Siemens / Neff / Balay / Miele: Press and hold the Reset water button for 5 seconds. Newer types: press the Options button until "Filter change" is selected, press the +/- buttons until the "Filter change" screen expires.

Caple: The light turns green.

Daewoo / Nardi / Pilgrim / Steel: Press the Ice Maker Lock button for 3 seconds or more;

De Dietrich: press and hold the Reset filter key for 5 seconds.

Gaggenau: GE: Press and hold the Reset Water Filter button on the dispenser for 3 seconds. GE: Haier: press the Reset button.

KitchenAid: Press and hold the Reset filter button for 3 seconds until Command or Replace the light goes out.

Maytag: Press Options, then Water Filter, then Reset and then Yes. The status light changes from red to green when the system is reset. Or, press and hold the Reset filter button for 3 seconds.

Samsung: Press the Ice and Child Control (or Humkt Control) buttons simultaneously for 3 seconds. Note: Hold down the keys for only 3 seconds. If you press these 2 buttons simultaneously for 5 seconds, the reset function will reset. Release the buttons and repeat the same step once. The water filter indicator light turns green.

Smeg: press and hold the OK button until the three points appear again on the screen. Or press the key and hold down the Renewal button for 5 seconds.

Exemption: press and hold the reset filter key for 5 seconds.

Whirlpool / Hotpoint- Ariston / Kppersbusch: Press the Reset button until the icon turns blue (or green). The Reset filter button does not work if the filter icon is already blue (or green). Or press the light switch 5 times within 10 seconds.

Source by Melanie Arnaud

Leave a Reply

Your email address will not be published. Required fields are marked *