5 Unusual Ways To Improve Bad Signs On Reception

The bad alarm of the phone is never appreciated. No one likes those who need a sign on the phone screen. You may suffer from this problem sometime in your life.

Such problems have always been there and over the years people have come up with unique, unusual and improvised remedies for these problems.

Old Radios

An old wireless could be a solution for a poor reception. They say that all you need is an old wireless. This may seem ridiculous, but there is actually evidence available on YouTube that ensures the success of using this technology. All you have to do is put a wireless device near your computer and connect it to your mobile phone's external antenna with a copper wire.

Tesla Coils

It's a Circuit Breaker which can help you to add the phone. All you need is a small piece of tesla tape and tape. You can connect the desk to the antenna of your mobile phone, then use the desk to make sure it stays there. (That's if you can find the antenna on your phone …)

Paper clip

This is one of the easiest ways to add a reception. A cutting device is available in almost all offices. All you have to do is to take a clipboard and fix it to the external antenna of your phone. Attention must be while you do so as a paper clip may damage the display or cover of the mobile phone. A series of tape can be used to connect the clip to your mobile phone.

Empty cans

Now you will never throw those empty cans as they can recover you from your bad reception. This is one of the most absurd ways, but it really works like magic. All you need is two empty cans, a cutter, a pair of copper wire and soldering.

The Steps

1. Wash the cans properly so that no residue remains.

2. The end of someone's end can properly all the way where there is no surge and then connect both cans together by soldering them.

3. Make one hole in one of the cans and put in the copper wire and make sure it is well. Put the other end of the wire into the outer antenna of your cell, and you're done!

These are the simple steps to utilize empty cans to improve the signal of your receipt. Many variants of the method are available and some even contain the possibility of making small screws of cans for decorations.

Insulated Wire

This is again one of the cheapest methods. All you need is a 20cm insulated wire. Run both sides of the wire (about 1 cm apart) and spoon about half of the wire in a letter to give them those circles. Now that your antenna is ready, you need to put it on your mobile phone's outer antenna and you're done.

Enjoy these cheaper and easy methods and say goodbye to the poor signal reception. Or you can truly boost the weak cell signal with proven brand boosters that are very affordable, far more effective and will greatly reduce the damage to your expensive wireless devices.

Source by Kory Zelickson

Leave a Reply

Your email address will not be published. Required fields are marked *